Сибирский федеральный университет

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: International Scientific Conference on Applied Physics, Information Technologies and Engineering, APITECH-III 2021

Год издания: 2021

Идентификатор DOI: 10.1088/1742-6596/2094/4/042044

Аннотация: The electric sliding contact in the brush mechanism is one of the most unreliable components of electric machines of alternating and direct current and other electrical equipment in which the transmission of electric current is carried out using sliding contacts that require fairly frequent maintenance and can be a source of sparking. It is possible to increase the reliability and efficiency of electric machines with sliding electric contacts by replacing the dry friction mode with the liquid friction mode in the sliding electric contact. The most appropriate material for use in the construction of a liquid metal sliding contact is gallium. When replacing the sliding electrical contacts of asynchronous electric machines with a phase rotor from traditional solid to liquid metal gallium, it is possible to increase their power up to 1.4 times due to the availability of a higher thermal operating mode. © 2021 Institute of Physics Publishing. All rights reserved.

Журнал: Journal of Physics: Conference Series

Выпуск журнала: Vol. 2094, Is. 4

Номера страниц: 42044

ISSN журнала: 17426588

Издатель: IOP Publishing Ltd

• Egorov A.V. (Sarov State Physics Technical Institute, National Research Nuclear University MEPhI, Sarov Branch (SarPhTI), st. Dukhova, 6, Sarov, 607182, Russian Federation, Volga State University of Technology, Lenin Square, 3, Yoshkar-Ola, 424000, Russian Federation)
• Kaizer Y.F. (Siberian Federal University, Svobodny Avenu, 82/6, Krasnoyarsk, 660041, Russian Federation)
• Lysyannikov A.V. (Siberian Federal University, Svobodny Avenu, 82/6, Krasnoyarsk, 660041, Russian Federation)
• Kuznetsov A.V. (Krasnoyarsk State Agrarian University, Kirenskogo, 2, Krasnoyarsk, 660049, Russian Federation)
• Bezborodov Y.N. (Siberian Federal University, Svobodny Avenu, 82/6, Krasnoyarsk, 660041, Russian Federation)
• Shram V.G. (Siberian Federal University, Svobodny Avenu, 82/6, Krasnoyarsk, 660041, Russian Federation)
• Kuzmin N.V. (Krasnoyarsk State Agrarian University, Kirenskogo, 2, Krasnoyarsk, 660049, Russian Federation)
• Kuznetsova P.A. (Siberian Federal University, Svobodny Avenu, 82/6, Krasnoyarsk, 660041, Russian Federation)

• Scopus
• Ядро РИНЦ (eLIBRARY.RU)