Lenticular Covering Block with Belts of Bent Metal Channels | Научно-инновационный портал СФУ

Lenticular Covering Block with Belts of Bent Metal Channels

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: 4th International Scientific and Practical Conference on New Information Technologies in the Architecture and Construction, NITAC 2021

Год издания: 2022

Идентификатор DOI: 10.1063/5.0107443

Аннотация: The main materials of theoretical and experimental studies of lenticular covering blocks with belts of bent metal channels fixed at the ends of the block and curved longitudinally in the shape of a square parabola, with alternating upper and lower belts, and a system of intermediate elements is between the belts are presented in this work. The calculation and design of the LCB for a span of 6 m is performed, the similarity coefficient has been determined, a reduced model of the LCB with a span of 2.5 m has been developed, manufactured and tested. Good theoretical and experimental convergence data is noted. © 2022 American Institute of Physics Inc.. All rights reserved.

Ссылки на полный текст

Издание

Журнал: AIP Conference Proceedings

Выпуск журнала: Vol. 2657

Номера страниц: 20035

ISSN журнала: 0094243X

Издатель: American Institute of Physics Inc.

Персоны

  • Grigoriev S.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Plyasunova M.A. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Plyasunov E.G. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Kolesnikov A.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Alekseenko I.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)

Вхождение в базы данных

Информация о публикациях загружается с сайта службы поддержки публикационной активности СФУ. Сообщите, если заметили неточности.

Вы можете отметить интересные фрагменты текста, которые будут доступны по уникальной ссылке в адресной строке браузера.