Сибирский федеральный университет

Тип публикации: статья из журнала

Год издания: 2023

Идентификатор DOI: 10.59957/jctm.v58i2.68

Ключевые слова: forging, alternating deformation, crossing strikers, cut-out strikers, internal defect, microstructure

Аннотация: This work is devoted to the study of the forging process of round cross-section blanks in a new design crossing strikers, which ensures the additional shear deformation implementation in the entire volume of the deformable workpiece during the deformation process. This contributes to a better closure of internal defects and a more intensive and uniform processing of the initial metal structure compared with forging in the previously known design of crossing strikers, as well as compared with forging in conventional cut-out strikers. Moreover, the presence of an additional block of cut-out inserts in this design of crossing strikers allows to obtain forgings with an even cross-section, close to a circle, without additional processing of the forgings obtained in the cut-out strikers

Журнал: Journal of Chemical Technology and Metallurgy

Выпуск журнала: Т.58, №2

Номера страниц: 406-411

ISSN журнала: 13147471

• Naizabekov Abdrakhman (Rudny Industrial Institute)
• Volokitina Irina (Rudny Industrial Institute)
• Panin Evgeniy (Karaganda Industrial University)
• Tolkushkin Andrey (Rudny Industrial Institute)
• Voroshilov Denis (Siberian Federal University)
• Rovin Sergey (Belarusian National Technical University)
• Kasperovich Andrey (Belarusian State Technological University)

• Ядро РИНЦ (eLIBRARY.RU)