Тип публикации: статья из журнала
Год издания: 2018
Ключевые слова: nominal yield strength, relative elongation, silicon carbide, silumin AK12, tabletted ultra-finely dispersed modifier, ultimate breaking strength
Аннотация: Results are provided for a study of the structure and mechanical properties of alloy AK12 modified with tabletted ultra-finely dispersed modifier based on silicon carbide, introduced “beneath a metal stream” without additional mixing, and in a rotary device. It is established that the optimum method for introducing modifier is that of “beneath a metal stream.” In this case the ultimate breaking strength increases from 110 to 150 MPa, nominal yield strength from 85 to 94 MPa, and relative elongation from 2.3 to 6.2% (metal pouring temperature into a mold 750 °C). Metallographic examination is used to determine the reduction in macro-grain size in test pigs (ingots) by a factor of four compared with control alloys, absence of porosity, and an increase in ingot density from 2.59 to 2.66 g/cm3. Introduction of ultra-finely dispersed modifier based on silicon carbide increases the number of crystallization centers in a 1 kg ingot to 2·1011 units. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.
Издание
Журнал: Teoriya i Praktika Fizicheskoy Kultury
Выпуск журнала: Is. 10
Номера страниц: 101-104
Персоны
- Voynich A.L. (Siberian Federal University, Krasnoyarsk, Russian Federation)
- Chikurov A.I. (Siberian Federal University, Krasnoyarsk, Russian Federation)
- Shilko V.G. (Tomsk State University, Tomsk, Russian Federation)
- Radaeva S.V. (Tomsk State University, Tomsk, Russian Federation)
- Petrova M.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)
Вхождение в базы данных
Информация о публикациях загружается с сайта службы поддержки публикационной активности СФУ. Сообщите, если заметили неточности.