Сибирский федеральный университет

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: International Workshop on Advanced Technologies in Material Science, Mechanical and Automation Engineering - MIP: Engineering-2019; Krasnoyarsk; Krasnoyarsk

Год издания: 2019

Аннотация: The present paper shows the results of studies on the use of the plastic lubricants with ultrafine diamond-graphite powder in rolling bearings. Even with a short-term tightening of the operating mode, it is possible to establish a friction boundary mode by squeezing the lubricant out of the rolling parts contact zone with the ring tracks, which leads to an increase in the friction torque and temperature. Reducing slippage, lowering the working temperature, limiting the friction torque can be achieved by improving the antiwear and anti-friction properties of the lubricants used. Tribological studies have established that the introduction of the ultrafine diamond-graphite powder into the composition of basic industrial lubricants significantly improves their performance. The introduction of ultrafine diamond-graphite powder into a lubricant reduces the amount of rolling bearings wear up to 1.6-1.8 times, reduces the amount of friction torque to 23-25%. The presence of a lubricant that can significantly reduce friction forces, reduces the amount of internal stresses and delays the fatigue cracks progress, which allows to increase the service life of rolling bearings by 1.5-2 times.

Журнал: IOP Conference Series: Materials Science and Engineering

Выпуск журнала: 537

Номера страниц: 032057

Издатель: Institute of Physics Publishing

• Dokshanin S.G. (Siberian Federal University)
• Tynchenko V.S. (Reshetnev Siberian State University of Science and Technology)
• Bukhtoyarov V.V. (Reshetnev Siberian State University of Science and Technology)

• Ядро РИНЦ (eLIBRARY.RU)