Alphaset process and molding sands in russia | Научно-инновационный портал СФУ

Alphaset process and molding sands in russia

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: International Scientific Conference on FarEastCon, ISCFEC 2019

Год издания: 2020

Идентификатор DOI: 10.4028/www.scientific.net/MSF.992.534

Ключевые слова: alphaset process, demands to materials, making in russia, molding sands

Аннотация: The advantages of the AlpHaset process, the features of its application, the requirements for the materials used are considered. Molding sands, making in Russia are analyzed. It is noted that the consumption of molding and core mixture used in the manufacture of castings using this process is reduced by 3-4 times. The mixture after knocking out is regenerated up to 90%, which, in comparison with liquid glass, does not require the removal of spent molding and core mixtures to the dump, thereby, improving the environmental situation in the industrial zone. In addition, this process contributes to the introduction of environmentally friendly technological process of manufacturing castings in foundries of machine-building enterprises and individual foundries. The best values of strength are achieved on quartz sand, with a content of fine dust particles ranging in size from 0 to 0.125 mm less than 2% and a residue on the grid of 0.125 mm maximum 5%. The average grain size of such sand should be 0.25-0.30 mm. The molding sands produced in Russia are analyzed. The conclusion is made on the application of the AlpHaset process, based on the use of molding sand, produced according to Russian State Standard 2138-91. © 2020 Trans Tech Publications Ltd, Switzerland.

Ссылки на полный текст

Издание

Журнал: Materials Science Forum

Выпуск журнала: Vol. 992 MSF

Номера страниц: 534-539

ISSN журнала: 02555476

Авторы

  • Kukartsev V.A. (Siberian Federal University, 79, Svobodny pr., Krasnoyarsk, 660041, Russian Federation)
  • Kukartsev V.V. (Siberian Federal University, 79, Svobodny pr., Krasnoyarsk, 660041, Russian Federation, Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation)
  • Tynchenko V.S. (Siberian Federal University, 79, Svobodny pr., Krasnoyarsk, 660041, Russian Federation, Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk, 660037, Russian Federation)

Вхождение в базы данных

Информация о публикациях загружается с сайта службы поддержки публикационной активности СФУ. Сообщите, если заметили неточности.

Вы можете отметить интересные фрагменты текста, которые будут доступны по уникальной ссылке в адресной строке браузера.